Saltire Stables - Animal Housing

Animal Housing

Animal Housing Specifications - All Models Kennels Catteries

At Saltire Stables our unique design & build philosophy means that we are able to utilise a small number of components to create bespoke buildings against individual commissions to meet just about any requirement. One advantage of this particular approach is that the costs of manufacture are not prohibitive enabling any given building to be designed to perform as you need. All the buildings feature the same component elements that have made Saltire Stables so popular.

CCA Pressure treated weatherboarding.

Stress Graded, Kiln Dried, dressed structural CLS framing.

High performance ONDULINE, BARDOLINE shingle ONDUSTEEL tile or PROFILE CLAD roofing systems.

Heavy duty construction and fittings.

Fully insulated and ventilated floor decks, walls and roofing.

Quality pre-manufactured components including double glazed windows, patio doors and roof windows.

Rugged framed access doors with fully galvanised ironmongery.

Kennel Specification Table

The design principles within a 4.8m (16'0) deep building with 2.1m 7'0) eaves 3m (10'0) apex are:
Kennel Area	1.2m (4'0) wide x 1.2m (4'0) deep All 4 walls lined in 11mm OSB to1.5m (5'0) tall with option to fully insulated walls with acrylic viewing window Fixed ceiling at 1.5m with access for storage above for beds, rugs etc Heavy Duty floor with 10mm rubber covering to isolate from ground below and provide wipe down surface Rear sleeping shelf 450mm deep with metal edging strip to prevent cribbing
Run Area	2.44m (8'0) deep completely covered by roof Kennel / Run wall with full height 600mm (2'0) wide access door split with 600 x 600mm lower dog access door Partition wall 11mm OSB lined to 1.2m with 50 x 50mm galvanised weldmesh chatgrill on upper section External wall can be solid or weldmesh in any ratio at no cost difference Run / Corridor wall with full weldmesh including 600mm galvanised weldmesh door, inwards opening
Option	Fully galvanised steel barred panels 5cm bar spacings, 16mm thick bars for fronts and external or partition sides Panels are 1.8m tall but are extended with timber panels to 2.1m tall as standard panels
Canopy Area	1.0m deep to protect doors and clients from inclement weather
Materials	Framework	3 x 2 nom kiln dried pressure treated CLS at 600mm centres
	Vapour Barrier	Tyvek framewrap breathable membrane
	Cladding	19 x 150mm nominal (16 x 145mm finish) Swedish kiln dried pressure treated weatherboard
	Roofing	Black Onduline with translucent sheet over front face centered on each bay
	Guttering	To front and rear in 112mm 1/2 round black pvc with 68mm downpipe
	Glazing	2mm acrylic safety glazing
	Mesh	50 x 50mm square heavy duty galvanised weldmesh
	Lining	11mm OSB external grade
	Offered subject standard terms and conditions of sale. Excluding VAT but including erection onto customer prepared concrete plinth with single course of brickwork. Delivery costed at 5% of order value, subject minimum distance charge.

Cattery Specification Table

The design principles within a 4.8m (16'0) deep building with 2.1m (7'0) eaves / 3m (10'0) apex are:
Chalet Area	1.2m (4'0) wide single occupancy 1.65m (5'6) double occupancy x 1.22m (4'0) deep All 4 walls fully insulated and lined to underside of roof so no perching areas for the cats Fully sarked roof for strength, warmth and security Lining and sarking in 12mm quality external hardwood plywood which can be painted or sealed if required Rear wall has fixed 375 x 375mm acrylic window for light and louvre grill above for ventilation Melamine shelving - 450mm wide full width on rear wall and 225mm deep on front wall
Run Area	2.44m (8'0) deep Chalet / Run wall with full height 600mm (2'0) wide inward opening access door with swinging catflap and fixed 375 x 375mm viewing window Partition Wall plywood fully lined with 50 x 50mm galvanised weldmesh chatgrill. End wall solid weatherboard Option to sheet side and rear walls to 4'0 with 2.7mm polypropylene sneeze barriers Melamine shelving 225mm deep along side wall underneath mesh grill with notched cat ladder for access Run / Corridor wall with full weldmesh including 600mm galvanised weldmesh door, inwards opening
Option	Fully galvanised steel barred panels 5cm bar spacings, 16mm thick bars for fronts and external or partition sides Panels are 1.8m tall but are extended with timber panels to 2.1m tall as standard panels
Corridor Area	760mm external access door, inward opening timberclad with acrylic upper viewing window Corridor partitioning door, as above, every 3.3 or 3.6m for security 1 x 750 x 750mm acrylic top hinged casement window for ventilation in centre of every 3.3 or 3.6m wide bay
Materials	Framework	3 x 2 nom kiln dried pressure treated CLS at 600mm centres
	Vapour Barrier	Tyvek framewrap breathable membrane
	Cladding	19 x 125mm nominal Swedish kiln dried pressure treated weatherboard
	Roofing	Black Onduline with translucent sheet over front face centered on each bay
	Guttering	To front and rear in 112mm 1/2 round black pvc with 68mm downpipe
	Glazing	2mm acrylic safety glazing
	Mesh	50 x 50mm square heavy duty galvanised weldmesh
	Lining	12mm hardwood plywood WBP external grade far eastern
	Sneeze Barrier	2.7mm polypropelene in white for washing down with sealed rivits and mouldings
	Offered subject standard terms and conditions of sale. Excluding VAT but including erection onto customer prepared concrete plinth with single course of brickwork. Delivery costed at 5% of order value, subject minimum distance charge.