Interior Stabling Solutions For New And Existing Stables And Yards

A satisfied customer !!

You are obviously confined by the existing structure but assuming that it is sufficiently tall and generally large enough to be divided, our flexible bespoke manufacturing methods enable us to optimise the room available and to create stalls with modern standards of performance and space without affecting the external facades. Of course you can purpose build a larger structure and the internals are then supplied as an integral part of the building. If you are interested in taking this approach, make sure you look at our Canadian Barn systems which offer a mid range alternative.

Our range covers a full spectrum of options in terms of price and application. All offer good value for money but these days budgets are an important consideration and as such we can offer an effective low-cost solution to your needs with the OCHIL. Our medium priced option is the very attractive PENTLAND which is far and away our most popular model. The ultimate model is the LOMOND - simple in concept, it is extremely rugged, durable and designed for many years of hard work.

All the models share in common a 2.1m (7') door entry height, and 4' wide lower doors. Fronts and partitions/ends are shown on the price lists in 3.0, 3.6 and 4.2m sections (10,12 & 14') purely for costing purposes. We actually manufacture every internal to order and as such we can accommodate just about any need - if the fronts need to fit into a space of say 11' 2-3/4" - then that is the size we will make it! We can also allow for falls in existing floors and offer complete flexibility in terms of grill location, door handing and location of swivel feeders.

When assessing your structure, the main point to consider (apart from is it big and tall enough) is whether we will have good areas to get fixings to. We can usually get some kind of a fixing into a wall somewhere as long as it isn't solid granite! However we do encounter problems where floors are not concrete. In older barns they often used either stones or square setts or cobbles as a base. In many respects these are ideal for a stable floor as they are hard wearing and allow drainage and therefore we would rarely recommend totally digging them up but we would suggest laying concrete about 125mm (5") wide along the line of the fronts / partitions to enable us to get fixings down.

OCHIL MODEL
The Ochil is the introductory model in our range and is ideal for anyone on a tight budget. Framed in 50 x 75 nom structural CLS exactly like our loose boxes, it has a double top rail, and pressure treated bottom rail for long life. The lower 1.2m (4') uses our tough attractive 12mm exterior OSB Sterling Board for kicklining and the exteriors are vertical pressure treated softwood. The upper portion has 50 x 50mm galvanised weldmesh on one side of the timber studs. In the interests of economy, frame protection strips are shown as an optional extra and the doors are 4' as standard but use a normal padbolt.

PENTLAND MODEL
This is our most popular model as it has a very competitive price, offers excellent value for money, is strong, durable and attractive. The structural framing is upgraded to 50 x 100mm, again with a pressure treated bottom rail. Internally it has full height lining in OSB Sterling board with the option of moisture resistant MDF.We create an open atmosphere by utilising a combination of fully galvanised steel grills with 12mm solid bars at 100mm centres. With widths of 1.067 & 1.82m (42 & 72") and a height of 762mm (30") these are combined to suit exact customer demands.
Doors include autolock bolts and all entrances and exposed edges have steel anti crib protectors.

LOMOND MODEL
Lomond is our ultimate model and though very simple in appearance is infinitely flexible and extremely rugged. Available in the same sizes as all the other ranges, we utilise the KEEKLAMP system to tailor make the sections to every possible
circumstance.

The centre of the system is a 50mm external diameter medium steel tube and this connects by use of various specialised fittings into the uprights or adjacent panels. Everything is fully galvanised for a long and durable life. To the framework we fit special brackets which enable us to bolt the 18mm thick OSB Sterlingboard or Plywood for the bottom 1.2m (4') and 50 x 50mm weldmesh for the upper portions. The doors have a standard construction but use heavy duty crook and band hinges and have a 600mm front steel sheet and autolock bolts.