Stable Doors And Windows

STABLE DOORS

We can supply a full range of stable doors and other hardware for stables. Doors can be supplied either right of left handed (please state when ordering) and can also be supplied as a package complete with a frame or separately, say as a bottom door only, for use in internal stable applications. A fitting service is also offered within 100 miles and as well as the "standard" sizes shown below, we can also offer bespoke manufacturing to exact sizes for any door style - stable, tack or store/garage. A detailed data sheet which includes our windows is available on request.

Saltire Stables use quality materials throughout and endeavour to make our doors as complete as possible. Hinges are fitted to the leafs (when we know the handing) but slamstrips, kicklatches, padbolts and cabin hooks are supplied loose with screws for final site fitting. Flexibility is enhanced with a 100mm (4") trim allowance to the door to allow for uneven ground.

The doors use a very strong sandwich construction with a 50 x 100 nom kiln dried framework which is dressed to provide a stable core and minimal seasonal distortion. The internal faces, both top & bottom are 12mm OSB Sterling Board as standard with the option of plywood, MDF or TGV. We always make the face in 16 x 125 vertical mounted PTGV softwood which is fully pressure treated. Supplied in a light green colour, you can stain doors to a wide range of colours.

All fittings are fully galvanised and the bottom door has a 30 degree weatherstrip angle matched by the top door. In order to keep a very competitive basic price, we have made available a number of options which would not be needed by all customers; Frame chewstrip protection, autolok bolts, cranked or straight crook & band hinges, 600mm (2') steel door face sheet & frame protection strips together with rubber anti-kick mat & antiweaver grids are available from our EQUINE ESSENTIALS range.

DOORS construction
Frames	89mm deep x 38mm stile on hinge side x 76mm on closing side, CCA pressure treated
Doors	4 x 2/6 x 2 KD CLS core with 16 x 125 vertical weatherboarding and 12mm OSB lining. Standard angled split giving weather protection gives bottom door height of 1.3m Standard ironmongery is 2 cabin hooks, 2 6 x 3/4" Brenton padbolts, 9" stable kicklatch, 18" heavy duty tee hinges and alloy bottom door chew strip to top edge
NOTE	ALL DOORS ARE AVAILABLE SEPARATELY I.E. BOTTOM ONLY ETC
STABLE DOORS	66mm thick, fully lined
Doorset	1.22 x 1.96m top & bottom complete (Bottom 1.22m / Top 0.72m)
Frame	1.344 x 2.10m x 89mm deep, treated
PONY DOORS	66mm thick, fully lined
Doorset	1.067 x 1.96m top & bottom complete (Bottom 1.22m / Top 0.72m)
Frame	1.192 x 2.10m x 89mm deep, treated
TACKROOM DOORS	50mm thick, frame, ledge & braced
Door	750 x 1.96m 1 piece
Frame	840 x 2.10m x 63mm deep, treated
Options	inside top door lined with vertical CCA TGV
	upper door frame metal anti-crib protector
	600mm steel door sheet to face or rear
	12mm rubber sheet to rear stopping capped hocks
	20" cranked crook & band hinges
	autolok padbolt for bottom door
	change full door to 12mm plywood in lieu OSB
WINDOWS construction
Standard	38mm frame 745 x 745 outside size pressure treated, glazed in 2.8mm safety perspex, antinosing grill in 50 x 50mm galvanised weldmesh
Frame	to build in to suit window, 38 x 89 CCA pressure treated
size	frame to suit 830 x 830 external size
fixed	non opening, dry beaded sealed for security
bottom hinged	with window chain support (i.e. can fold down against face of building to open)
top hinged	with casement stay (used for office etc)
Special	only available complete with integral frames
slat & pane style	window as above but 600mm tall with double clear slat louvre openings
size	to fit brick opening 830 wide x 1032 mm
multislat	no window but 6 clear slat louvre openings, fully adjustable
size	to fit brickwork openings 830 wide x 950mm